Showing posts with label Holga. Show all posts
Showing posts with label Holga. Show all posts

Friday, May 21, 2021

Holga 120N & Ilford Delta 400

 


I took my Holga 120N out again the other day. I really like the 6x6 negative ratio size. The quality is surprisingly good for a plastic "toy" camera. This time I shot at Ft Harrison State Park and Eagle Creek Park in central Indiana on a cloudy / overcast day. I used Ilford Delta 400 in 120 size and developed it with Ilford Ilfotec DD-X 1+9 ratio for 9.5 minutes. The negatives were scanned with an Epson V800 Photo Scanner.

The results









Wednesday, November 27, 2019

Holga 120N - A Plastic Cult Toy Camera



Much has been written about the Holga. It’s a cult toy camera. All plastic with point and shoot with very few features or controls. You simply load it with 120 film set one of 4 distance setting, slide the aperture switch to either sunny or cloudy, aim and shoot. It’s that easy.

The main feature of the Holga line is they tend to be light leaky and the lens gives a soft / distorted vignette. This quirkiness gives the image it’s unique, “every picture is different” vibe. The plastic is a 60mm f/8 piece of plastic. You can set the camera to take 12 or 16 shots.

Practical? No, Fun? Yes

I’ve had mine for about 5 years. I recently took it out and shot a roll of Ultrafine Xtreme 400. I shot the roll in downtown Indianapolis on a grey but bright day. Film was developed using Ilford Ilfosol3 at 1+9 for 4.5 minutes. Negatives were scanned using an Epson V800.

I dig the camera. Here are some images.








Friday, September 16, 2016

I Have A Need, A Need For Sprockets

Recently I got the itch to shoot a roll of 35mm film with exposure all the way into the sprockets. Kind of a cool look, and I've never done it before.  Online I went to see how it could be done.  After reading a few blog posts, checking with Twitter friends, & watching a few videos I decided to give it a try by slightly hacking my Holga 120.

The Holga is a 120 sized film camera with limited / no controls.  It's simple so it's easy to mode & there were plenty of blog posts and videos on using one for sprockets.  OK, here we go I said.

My technique is to cut a plastic screw-top bottle cap in 1/2 and use it as the stabilizer for my 35mm roll, tape up the red window, and mode the receiving reel so the 35mm film doesn't slip around.  I also read up on how to advance the film using the Holga "clicks".

Here is what I finished last night in pictures

First, my camera and the split cap


Back open, and receiving spool removed


Gaffer tape handy and ready to tape over the red window so I don't get light leaks.  This is important since the 35mm film doesn't have backing paper like 120 film


Once side taped up


Inside too, why?  Well, why not


I didn't see this requirement on any of the blogs or videos (the recommendation is just to tape the film leader onto the spool).  However, I wanted to make a small channel the the film could wind in to keep film somewhat stable.


Bottle-cap jammed in.  The top one has the closed side facing down. The bottom side of the cap has the cut side facing out with the closed side down.  I taped the bottom side down, but didn't need to on the top 1/2.  It was snug.

The film fit perfectly between the 2 halves of the bottle-cap, and I cranked the film onto the receiving spool.  I closed the back, taped it shut (mainly because I had some gaffer's tape already cut off the roll) and cranked the film 42 clicks for the first shot.

 I've got a model shoot tomorrow in the studio and will bring this Sprocket Rocket with me.  After the shoot I play around with the roll.  I'll probably develop it pretty quickly and will followup.  The only challenge at this point is to figure out how to scan the film.  I'll deal with that later.

Camera fun

Sunday, April 3, 2016

Holga 120N Is Beautiful


Yes, I have a Holga 120N.  I got it as a freebie gift from my niece who lives in Prague.  Not sure where she got it, but she knew I still shot film. She said, "Uncle Steve, you want my Holga and a bunch of expired film that I have?"  It took me about 3 seconds to respond to that email.  The Holga is a cult, toy camera.  A medium format beauty!

Literally, the day I got the camera in the mail I saw the announcement the Chinese (Hong Kong?) manufacturer was stopping production.  A sad day, but hey, I got mine.  Soon after I got the camera I loaded it with a roll of Ilford XP400 Super 120.  And took it on a road trip out east and then another roll about a month ago.



The Holga 120N is simple to use.  There is really nothing to it.  It is a classic toy camera.  Very flimsy, plastic, plastic lens, minimal controls.  On my version it has a 60mm lens, 4 zone focus options on the lens, a sunny / cloudy setting (f/8 & f/13), and a N / B selector on the bottom.  The N mode is 1/100 second. What you also have (which screwed me up on one roll) is a 16/12 shot selector on the back.  Really, just a slider over the red window that tells you if you have the included in box insert for 16 shots.  

You'll note on the photos that they have that classic Holga toy camera vignetting and softness around the edges.  




I also did a roll with the 16 image selected.  Unfortunately, I forgot to put in the insert for 16 shots and it screwed up the roll.  However, it's kind of cool effect.  Semi double exposures.




The Holga is a fun camera to play with, but toy camera enthusiast already know this.  Get yourself one and enjoy.  Next for me is to try it with a roll of color film or sprockets on a 35mm roll.  Dig it.